openwrt安装samba共享文件

admin

opkg update
opkg list |grep samba
opkg install samba4-server
opkg install luci-app-samba4


安装的过程中需要下载大量的包  国外的IP 流量被卡的很死,有时候还下载失败 随缘吧

1. root@OpenWrt:/samba# opkg install samba4-server
   
2. Installing samba4-server (4.14.12-1) to root...
   
3. Downloading https://downloads.openwrt.org/releases/21.02.0/packages/x86_64/packages/samba4-server_4.14.12-1_x86_64.ipk
   
4. Installing libnettle8 (3.6-1) to root...
   
5. Downloading https://downloads.openwrt.org/releases/21.02.0/packages/x86_64/base/libnettle8_3.6-1_x86_64.ipk
   
6. Installing libgnutls (3.7.1-2) to root...
   
7. Downloading https://downloads.openwrt.org/releases/21.02.0/packages/x86_64/packages/libgnutls_3.7.1-2_x86_64.ipk
   
8. Installing libtasn1 (4.16.0-1) to root...
   
9. Downloading https://downloads.openwrt.org/releases/21.02.0/packages/x86_64/packages/libtasn1_4.16.0-1_x86_64.ipk
   
10. Installing liburing (0.7-1) to root...
    
11. Downloading https://downloads.openwrt.org/releases/21.02.0/packages/x86_64/packages/liburing_0.7-1_x86_64.ipk
    
12. Installing libpam (1.5.1-1) to root...
    
13. Downloading https://downloads.openwrt.org/releases/21.02.0/packages/x86_64/packages/libpam_1.5.1-1_x86_64.ipk
    
14. Installing libattr (2.4.48-2) to root...
    
15. Downloading https://downloads.openwrt.org/releases/21.02.0/packages/x86_64/packages/libattr_2.4.48-2_x86_64.ipk
    
16. Installing attr (2.4.48-2) to root...
    
17. Downloading https://downloads.openwrt.org/releases/21.02.0/packages/x86_64/packages/attr_2.4.48-2_x86_64.ipk
    
18. Installing libexpat (2.2.10-2) to root...
    
19. Downloading https://downloads.openwrt.org/releases/21.02.0/packages/x86_64/packages/libexpat_2.2.10-2_x86_64.ipk
    
20. Installing libdbus (1.13.12-1) to root...
    
21. Downloading https://downloads.openwrt.org/releases/21.02.0/packages/x86_64/packages/libdbus_1.13.12-1_x86_64.ipk
    
22. Installing dbus (1.13.12-1) to root...
    
23. Downloading https://downloads.openwrt.org/releases/21.02.0/packages/x86_64/packages/dbus_1.13.12-1_x86_64.ipk
    
24. Installing libavahi-dbus-support (0.8-7) to root...
    
25. Downloading https://downloads.openwrt.org/releases/21.02.0/packages/x86_64/packages/libavahi-dbus-support_0.8-7_x86_64.ipk
    
26. Installing libdaemon (0.14-5) to root...
    
27. Downloading https://downloads.openwrt.org/releases/21.02.0/packages/x86_64/packages/libdaemon_0.14-5_x86_64.ipk
    
28. Installing avahi-dbus-daemon (0.8-7) to root...
    
29. Downloading https://downloads.openwrt.org/releases/21.02.0/packages/x86_64/packages/avahi-dbus-daemon_0.8-7_x86_64.ipk
    
30. Installing libavahi-client (0.8-7) to root...
    
31. Downloading https://downloads.openwrt.org/releases/21.02.0/packages/x86_64/packages/libavahi-client_0.8-7_x86_64.ipk
    
32. Installing samba4-libs (4.14.12-1) to root...
    
33. Downloading https://downloads.openwrt.org/releases/21.02.0/packages/x86_64/packages/samba4-libs_4.14.12-1_x86_64.ipk
    
34. Configuring libpam.
    
35. Configuring libexpat.
    
36. Configuring libdbus.
    
37. Configuring dbus.
    
38. Configuring libavahi-dbus-support.
    
39. Configuring libdaemon.
    
40. Configuring avahi-dbus-daemon.
    
41. Configuring libtasn1.
    
42. Configuring libavahi-client.
    
43. Configuring libattr.
    
44. Configuring attr.
    
45. Configuring liburing.
    
46. Configuring libnettle8.
    
47. Configuring libgnutls.
    
48. Collected errors:
    
49. * opkg_download: Failed to download https://downloads.openwrt.org/releases/21.02.0/packages/x86_64/packages/samba4-libs_4.14.12-1_x86_64.ipk, wget returned 4.
    
50. * opkg_download: Check your network settings and connectivity.
    
51. 
    
52. * opkg_install_pkg: Failed to download samba4-libs. Perhaps you need to run 'opkg update'?
    
53. * opkg_install_cmd: Cannot install package samba4-server.
    

复制代码

1. root@OpenWrt:/samba# opkg install luci-app-samba4
   
2. Installing luci-app-samba4 (git-21.295.66822-2e989d8) to root...
   
3. Downloading https://downloads.openwrt.org/releases/21.02.0/packages/x86_64/luci/luci-app-samba4_git-21.295.66822-2e989d8_all.ipk
   
4. Installing samba4-libs (4.14.12-1) to root...
   
5. Downloading https://downloads.openwrt.org/releases/21.02.0/packages/x86_64/packages/samba4-libs_4.14.12-1_x86_64.ipk
   
6. Installing samba4-server (4.14.12-1) to root...
   
7. Downloading https://downloads.openwrt.org/releases/21.02.0/packages/x86_64/packages/samba4-server_4.14.12-1_x86_64.ipk
   
8. Configuring samba4-libs.
   
9. Configuring samba4-server.
   
10. Configuring luci-app-samba4.
    

复制代码

上面的包可以先下载下来本地安装 感觉能快一点

admin

1. root@OpenWrt:~# opkg install samba4-server
   
2. Installing samba4-server (4.14.12-2) to root...
   
3. Downloading https://downloads.openwrt.org/releases/22.03.0-rc6/packages/x86_64/packages/samba4-server_4.14.12-2_x86_64.ipk
   
4. Installing libtirpc (1.3.2-1) to root...
   
5. Downloading https://downloads.openwrt.org/releases/22.03.0-rc6/packages/x86_64/packages/libtirpc_1.3.2-1_x86_64.ipk
   
6. Installing terminfo (6.3-1) to root...
   
7. Downloading https://downloads.openwrt.org/releases/22.03.0-rc6/packages/x86_64/base/terminfo_6.3-1_x86_64.ipk
   
8. Installing libncurses6 (6.3-1) to root...
   
9. Downloading https://downloads.openwrt.org/releases/22.03.0-rc6/packages/x86_64/base/libncurses6_6.3-1_x86_64.ipk
   
10. Installing libreadline8 (8.1-1) to root...
    
11. Downloading https://downloads.openwrt.org/releases/22.03.0-rc6/packages/x86_64/base/libreadline8_8.1-1_x86_64.ipk
    
12. Installing libpopt0 (1.16-2) to root...
    
13. Downloading https://downloads.openwrt.org/releases/22.03.0-rc6/packages/x86_64/base/libpopt0_1.16-2_x86_64.ipk
    
14. Installing libcap (2.63-1) to root...
    
15. Downloading https://downloads.openwrt.org/releases/22.03.0-rc6/packages/x86_64/base/libcap_2.63-1_x86_64.ipk
    
16. Installing zlib (1.2.11-6) to root...
    
17. Downloading https://downloads.openwrt.org/releases/22.03.0-rc6/packages/x86_64/base/zlib_1.2.11-6_x86_64.ipk
    
18. Installing libgmp10 (6.2.1-1) to root...
    
19. Downloading https://downloads.openwrt.org/releases/22.03.0-rc6/packages/x86_64/base/libgmp10_6.2.1-1_x86_64.ipk
    
20. Installing libnettle8 (3.7.3-2) to root...
    
21. Downloading https://downloads.openwrt.org/releases/22.03.0-rc6/packages/x86_64/base/libnettle8_3.7.3-2_x86_64.ipk
    
22. Installing libatomic1 (11.2.0-4) to root...
    
23. Downloading https://downloads.openwrt.org/releases/22.03.0-rc6/targets/x86/64/packages/libatomic1_11.2.0-4_x86_64.ipk
    
24. Installing libgnutls (3.7.1-2) to root...
    
25. Downloading https://downloads.openwrt.org/releases/22.03.0-rc6/packages/x86_64/packages/libgnutls_3.7.1-2_x86_64.ipk
    
26. Installing libtasn1 (4.16.0-2) to root...
    
27. Downloading https://downloads.openwrt.org/releases/22.03.0-rc6/packages/x86_64/packages/libtasn1_4.16.0-2_x86_64.ipk
    
28. Installing libopenssl1.1 (1.1.1q-1) to root...
    
29. Downloading https://downloads.openwrt.org/releases/22.03.0-rc6/packages/x86_64/base/libopenssl1.1_1.1.1q-1_x86_64.ipk
    
30. Installing liburing (2.1-2) to root...
    
31. Downloading https://downloads.openwrt.org/releases/22.03.0-rc6/packages/x86_64/packages/liburing_2.1-2_x86_64.ipk
    
32. Installing libpam (1.5.1-1) to root...
    
33. Downloading https://downloads.openwrt.org/releases/22.03.0-rc6/packages/x86_64/packages/libpam_1.5.1-1_x86_64.ipk
    
34. Installing libattr (2.5.1-1) to root...
    
35. Downloading https://downloads.openwrt.org/releases/22.03.0-rc6/packages/x86_64/packages/libattr_2.5.1-1_x86_64.ipk
    
36. Installing attr (2.5.1-1) to root...
    
37. Downloading https://downloads.openwrt.org/releases/22.03.0-rc6/packages/x86_64/packages/attr_2.5.1-1_x86_64.ipk
    
38. Installing libexpat (2.4.7-2) to root...
    
39. Downloading https://downloads.openwrt.org/releases/22.03.0-rc6/packages/x86_64/packages/libexpat_2.4.7-2_x86_64.ipk
    
40. Installing libdbus (1.13.18-12) to root...
    
41. Downloading https://downloads.openwrt.org/releases/22.03.0-rc6/packages/x86_64/packages/libdbus_1.13.18-12_x86_64.ipk
    
42. Installing dbus (1.13.18-12) to root...
    
43. Downloading https://downloads.openwrt.org/releases/22.03.0-rc6/packages/x86_64/packages/dbus_1.13.18-12_x86_64.ipk
    
44. Installing libavahi-dbus-support (0.8-7) to root...
    
45. Downloading https://downloads.openwrt.org/releases/22.03.0-rc6/packages/x86_64/packages/libavahi-dbus-support_0.8-7_x86_64.ipk
    
46. Installing libdaemon (0.14-5) to root...
    
47. Downloading https://downloads.openwrt.org/releases/22.03.0-rc6/packages/x86_64/packages/libdaemon_0.14-5_x86_64.ipk
    
48. Installing avahi-dbus-daemon (0.8-7) to root...
    
49. Downloading https://downloads.openwrt.org/releases/22.03.0-rc6/packages/x86_64/packages/avahi-dbus-daemon_0.8-7_x86_64.ipk
    
50. Installing libavahi-client (0.8-7) to root...
    
51. Downloading https://downloads.openwrt.org/releases/22.03.0-rc6/packages/x86_64/packages/libavahi-client_0.8-7_x86_64.ipk
    
52. Installing samba4-libs (4.14.12-2) to root...
    
53. Downloading https://downloads.openwrt.org/releases/22.03.0-rc6/packages/x86_64/packages/samba4-libs_4.14.12-2_x86_64.ipk
    
54. 
    
55. Configuring terminfo.
    
56. Configuring libpam.
    
57. Configuring libexpat.
    
58. Configuring libdbus.
    
59. Configuring dbus.
    
60. Configuring libavahi-dbus-support.
    
61. Configuring libdaemon.
    
62. Configuring avahi-dbus-daemon.
    
63. Configuring libtasn1.
    
64. Configuring libcap.
    
65. Configuring libavahi-client.
    
66. Configuring libattr.
    
67. Configuring attr.
    
68. Configuring liburing.
    
69. Configuring libgmp10.
    
70. Configuring libnettle8.
    
71. Configuring libatomic1.
    
72. Configuring libgnutls.
    
73. Configuring libtirpc.
    
74. Configuring libncurses6.
    
75. Configuring libreadline8.
    
76. Configuring libpopt0.
    
77. Configuring zlib.
    
78. Configuring libopenssl1.1.
    
79. Configuring samba4-libs.
    
80. Configuring samba4-server.
    
81. root@OpenWrt:~#
    
82. root@OpenWrt:~# opkg install luci-app-samba4
    
83. Installing luci-app-samba4 (git-21.223.80587-f533f9d) to root...
    
84. Downloading https://downloads.openwrt.org/releases/22.03.0-rc6/packages/x86_64/luci/luci-app-samba4_git-21.223.80587-f533f9d_all.ipk
    
85. Configuring luci-app-samba4.
    
86. root@OpenWrt:~# opkg install luci-i18n-samba4-en
    
87. Installing luci-i18n-samba4-en (git-22.240.57888-17fde96) to root...
    
88. Downloading https://downloads.openwrt.org/releases/22.03.0-rc6/packages/x86_64/luci/luci-i18n-samba4-en_git-22.240.57888-17fde96_all.ipk
    
89. Configuring luci-i18n-samba4-en.
    

复制代码

这个是22.03.0-rc6的命令
卡半天才完成